Mariners Hall at the Columbia River Maritime Museum

Built Like a Boat: Oregon Glulam Shapes Mariners Hall in Astoria
On November 20, the Columbia River Maritime Museum in Astoria opens the doors to its new Warnock Building, home to Mariners Hall. The $34 million expansion nearly doubles the museum's footprint. Overhead, a sweeping roof of curved glulam ribs evokes the hull of a wooden boat turned upside down. The beams and posts holding it up were laminated right here in Eugene, from Oregon Douglas fir, by Zip-O-Laminators.
A building shaped by the river
The museum wanted a space that honors the boats, the river, and the people of the Lower Columbia. Opsis Architecture answered with a two-story, roughly 24,500-square-foot hall that curves in both plan and section. There are no right angles.
The design draws on the ribbed construction of traditional wooden boatbuilding. Glulam ribs spanning up to 60 feet carry more than 150 prefabricated purlin-plywood panels, forming an all-wood roof. Inside, a 40-foot-high atrium opens onto 20-foot windows facing the Columbia River.
The museum's director of external engagement, Caroline Wuebben, summed up the effect simply: "The building swoops, it curves, it moves."
Every beam had one place to go
A structure this organic demands precision. Opsis worked closely with StructureCraft, the project's structural engineer and timber design-build partner, using parametric tools like Rhino and Grasshopper. The team refined the framing system to use material efficiently and cut down the number of unique wood elements, without losing the fluid character of the original sketches.
The result was a kit of parts where each beam and roof panel was made for one specific location. Zip-O-Laminators manufactured the glulam at our APA-certified plant in Eugene. The laminated members then traveled to StructureCraft's shop in Abbotsford, British Columbia, for fabrication before heading to Astoria.
From delivery to topping out in three weeks
Astoria-based Rickenbach Construction led the build, with about 85% of subcontractors drawn from the local area. Construction started in an unusual order. The museum's 52-foot steel-hulled Coast Guard motor lifeboat, Triumph Two, was too large to fit through any door, so crews set it into a custom pit first and built the hall around it.
Once the timber arrived on site, Rickenbach's crew set the final 60-foot curved glulam beam just three weeks later. The topping-out ceremony borrowed from maritime tradition: the team signed the last beam, placed a silver dollar for luck, and raised a whiskey toast in the spirit of "planking out" a new vessel. Museum curator Jeff Smith said the structure "seems to breathe and flow," much like a boat on the water.
Wood and steel, working together
Mariners Hall is a hybrid structure. Timber and steel columns support the glulam roof. Upper levels and catwalks use steel framing, with tension rods hung from the glulam ribs so they could be built without shoring. Because Astoria's riverfront soils are soft silts and clays, steel piles were driven about 50 feet deep to keep the building from settling.
The design also earned recognition from Energy Trust of Oregon, which selected Mariners Hall as a featured spotlight project.
What visitors will find
Under the timber canopy, Mariners Hall holds dozens of historic vessels, a suspended Coast Guard helicopter, and the Bulkhead, a two-level exhibit spine roughly 200 feet long filled with maritime artifacts. A curving ramp lets visitors see the boats from every angle. The building also adds the museum's first purpose-built classroom, serving a program that reaches more than 15,000 regional students each year.
Why it matters to us
Mariners Hall is the kind of project our team loves: a one-of-a-kind form, a tight collaboration between designer, engineer, and fabricator, and Oregon wood telling an Oregon story. Zip-O-Log Mills has milled Pacific Northwest timber since 1944. Zip-O-Laminators carries that legacy forward with glulam produced from Douglas Fir lamstock here in our backyard.
Photo credits: Opsis, StructureCraft and Flor Projects




Comments